Publish Time: 2022-01-26 Origin: Site
The hinge is divided into two types: detachable and fixed according to the type of base. According to the type of arm body, it is divided into two types: slide-in type and card type. According to the cover position of the door panel, it is divided into full cover (straight bend, straight arm) with a general cover of 18 cm, half cover (middle bend, curved arm) with a cover of 9 cm, and the built-in (big bend, big curved) door panels are all hidden inside. According to the style of hinge development stage, it is divided into: one-stage force hinge, two-stage force hinge, and hydraulic buffer hinge. According to the opening angle of the hinge: generally used 95-110 degrees, special 45 degrees, 135 degrees, 175 degrees and so on. According to the type of hinge, it is divided into: ordinary one, two-stage force hinge, short arm hinge, 26 cup micro hinge, marble hinge, aluminum frame door hinge, special angle hinge, glass hinge, rebound hinge, American hinge, damping hinge, etc.
General hinge, it can be used for cabinet doors, windows, doors, etc. Hinge, from the material can be divided into: iron, copper, stainless steel. Hinges are suitable for cabinets and wardrobe doors, 75mm are suitable for windows and screen doors, 100-150mm are suitable for wooden doors and aluminum alloy doors in gates. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After installing the hinges, various bumping beads must be installed, otherwise the wind will blow the door panel. In addition, there are special hinges such as detachable hinges, flag hinges, H hinges, etc. They can be disassembled and installed according to various special needs of the wooden door, which is very convenient.
Spring hinges are mainly used for cabinet doors and wardrobe doors, which generally require a thickness of 18-20mm. In terms of material, it can be divided into: galvanized iron, zinc alloy. In terms of performance, it can be divided into two types: holes that need to be drilled and holes that do not need to be drilled. No need to punch holes is what we call bridge hinges. The bridge hinge looks like a bridge, so it is commonly known as the bridge hinge. Its characteristic is that it does not need to drill holes in the door panel, and it is not limited by the style. Specifications are: small, medium, large. Holes that need to be drilled are spring hinges commonly used on cabinet doors.
1. Find the 2 bolts connecting the hinges behind the toilet lid (there is a cover on the bolts, you can see the two bolts when you open the cover up).
2. Use a Phillips screwdriver to remove the two bolts, pay attention to the installation sequence of the nuts and washers on the bolts, and prevent the washers and nuts from falling during the disassembly process.
3. Remove the bolts and nuts.
4. Clean the dirt on the edge of the toilet.
5. Clean the dirt on the toilet seat.
6. Install the restoration toilet lid hinge, taking care to prevent the sealing ring on the toilet lid from falling off.