Model: IT-100-B
Shell material: ABS
color: White
Toilet cover: PE
Control method: manual button plus induction two-in-one
Power supply voltage: input voltage AC100-240V 50/60Hz output ≤ 7.5V
Battery voltage: 6V (battery)
Power consumption: static ≤ 0.5W dynamic ≤ 5W
1. Induction/button control for changing sleeves
2. Delayed response
3. Slow down cover
4. Motor overload protection
5. Multiple waterproof and moisture-proof
7. Battery undervoltage prompt
How to install toilet seat cover?
1. Some toilet lids are fixed with screws. At this time, you only need to find the screw cap, use a wrench to remove the screw, and then replace it with a new one. The screw cap installed in the bright place is easy to unscrew directly, and the screw cap installed in the dark place cannot be seen. It is usually located on the side of the toilet near the water tank. After opening the cover, you can usually find it by touching it in the direction of the water tank.
2. If the toilet is fixed with fixing bolts, when replacing the toilet cover, you only need to remove the fixing bolts behind the toilet to remove the old toilet cover. After measuring the size, screw hole distance, and toilet cover After the width and length, buy a new toilet seat for replacement, and screw the screw in the opposite direction during installation.
3. Generally, different styles of toilet covers have different installation methods. Some toilet covers are connected to the toilet by screws. Just reach the back of the toilet, find the screws on both sides and unscrew them. The whole cover can be taken off, and then the toilet cover can be replaced, which is also convenient.
4. Of course, if these simple disassembly methods do not work, it is recommended to find professional maintenance and installation personnel to disassemble and replace the toilet cover. Remember not to force the disassembly by yourself, which will cause damage to the toilet. Otherwise, the entire toilet needs to be replaced. , the cost will be higher.