Model: IT-200B-S
Shell material: ABS
color: White
Toilet cover: PE
Control method: manual button + induction
Power supply voltage: input voltage AC100-240V 50/60Hz output 24V
Power consumption: static ≤1.5W dynamic ≤15W dynamic heating power consumption ≤60W
1. Induction/button control for changing sleeves
2. Thermostatic seat ring
3. Counting times of use (LED display)
4. Seat temperature prompt (LED display)
5. Delayed response
6. Slow down cover
7. Motor overload protection
8. Multiple waterproof and moisture-proof
Extended information:
The flushing principle of toilets on the market today is basically two categories: straight-flush and siphon. The siphon is divided into vortex siphon and jet siphon.
The flush toilet uses the momentum of the water flow to discharge the feces. Generally, the pool wall is steeper and the water storage area is small, so that the water force is concentrated, the falling water force around the toilet ring is increased, and the flushing efficiency is high.
(1) Vortex siphon
This kind of toilet flushing port is located on one side of the bottom of the toilet. When flushing, the water flow forms a vortex along the pool wall, which will increase the flushing force of the water flow on the pool wall, and also increase the suction force of the siphon effect, which is more conducive to the toilet. Dirt inside is discharged.
(2) Jet siphon
A further improvement has been made on the siphon toilet. A secondary jet channel is added at the bottom of the toilet, aiming at the center of the sewage outlet. When flushing, part of the water flows out from the water distribution holes around the toilet ring, and part of the water is ejected from the jet outlet. , This toilet is based on the siphon, with the help of a large water flow impulse, to quickly wash away the dirt.