How does toilet damper work?

The damping components in the damping structure are basically in an elastic state, mainly to the main structure can provide a good enough stiffness or damping, so that the damping damping structure can effectively meet the requirements required in normal use.  

Under the effect of different vibration, the damping device is to be able to take the lead in entering the work status of energy dissipation, effectively generate large damping, the input structure of a large number of energy dissipation, the dynamic responses of the structure of the rapid attenuation, and for the main structure is not be very obvious inelastic deformation,  This further ensures the safety of the structure in the use of strong earthquakes or strong winds.  

When the solid vibrates, the energy generated by the solid vibrates is dissipated by the damping layer as much as possible. This method is called damping damping.

What is the torque of the damper?

The friction torque generated by the shaft rotation with the bearing is the damping torque.  Damped torque occurs when the shaft is subjected to lateral (radial) or axial forces, and is minimal when the shaft is subjected to pure torque.

The stainless steel unidirectional damper delivers maximum torque up to 6Nm(60kgF.cm).  It can be applied to all kinds of high-grade heavy cover plate, play the role of slow down cover plate, have shock proof effect and slow down the door opening and closing speed, make it smooth and smooth, effectively reduce the noise generated in the process of using the product, improve the grade of the whole product.  

This product solves the bottleneck that the torque of one-way damper on the current market cannot reach 5Nm. In addition, the shell is made of stainless steel with strong tensile strength, which avoids the phenomenon of shell cracking during the use of high torque damper, and greatly improves the safety of using one-way buffer for heavy cover plate.  

How to install and replace the lid?

When you use the lid for a long time, you sometimes find that when you put the lid on, the lid pops off and lands heavily on the toilet.  If you go to the bathroom at night, it can be very jarring.  And the closestool that buys newly, the lid is to drop slowly commonly, can stagger to come down in arbitrary Angle.  If the toilet seat is falling fast, there is a failure of its damping system, or slow drop system.  So how to deal with this kind of failure?  

1. Check the toilet lid first. Put down the upright toilet seat. If the toilet seat can stay in any position and fall slowly and evenly, it means that there is no problem with the toilet seat. If the toilet lid or seat cushion snaps down quickly, it means that the damping system slow-down system is faulty.

2. In the second step, press the inside of the pin at the connection between the toilet cover and the toilet to the outside, and then lift the toilet cover up. This makes it easy to remove the toilet lid. If you look at it from the outside, you can't see any place for unloading. This is where the removal of the toilet cover needs special instructions. It is specially designed for the sake of beauty.

3. Take a right-angled hexagonal wrench, use the short end to insert one end of the pin from the outside, push it hard to the inside, and then the pin will come out. Then take out the pin on the other side as well. This is also an important step.

4. The two pins removed are the damping and slow-down system of the toilet lid. It generally consists of an inner and outer cylinder and a viscous damping fluid sealed in the cylinder. The fault is due to the leakage of damping fluid due to poor sealing, and it is difficult to maintain and can only be replaced. After dismantling, measure the dimensions of each part, and purchase the same type of pins according to the structure.  

5. Install the pins to the toilet lid in the reverse order of removal. Then align the two holes on the pins under the toilet lid with the two small uprights on the toilet, and press down to install it.

Remark: When buying pins, you must carefully measure the size and choose and buy accessories of the same model.