- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
loading
Model: IT-200-C
Shell material: ABS
Color: White
Toilet cover: PE
Control method: manual button + remote control button
Power supply voltage: input voltage AC100-240V 50/60Hz output 24V
Power consumption: static ≤1.5W dynamic ≤15W dynamic heating power consumption ≤60W
1. Remote control\button control for changing sleeves
2. Thermostatic seat ring
3. Delayed response
4. Slow down cover
5. Motor overload protection
6. Multiple waterproof and moisture-proof
Installation Notes:
1. Insert the 2 expansion rubber sleeves with nuts into the 2 mounting holes on the ceramic toilet, then place the fixing plate and the metal adjustment piece in turn, and tighten the 2 fixing screws by hand (about 70% tight) to the expansion rubber. in the set of nuts.
2. Push the cover onto the fixing plate, move and adjust the position of the cover on the ceramic toilet. Then press the push rod of the cover, remove the smart cover, tighten the fixing screw with a screwdriver, and then push it into the fixing plate to complete the positioning of the host.
3. First connect the water inlet hose to the smart cover, then connect the filter to the other end of the hose, and finally connect the filter to the water supply connector. Be careful not to tighten too much when connecting the water pipe, so as not to damage the plastic threads, as long as you can ensure that there is no water leakage.
4. Turn on the water tap slowly and check for leaks. Turn off the water faucet after making sure no water leaks.
5. Insert the power plug, press the switch on the plug, the indicator light on it lights up to indicate that the power is on.
6. Leakage protection test: in the power-on state, press the test switch on the plug, then the indicator light goes out and the power is cut off. If the indicator light does not go out after pressing the test switch, or if the test switch is not pressed after the power is turned on, the indicator light also goes out automatically, indicating that there is a problem with the circuit or the power plug, and you should ask a professional to repair it before continuing the installation.
7. System self-inspection: After ensuring that the water-leakage and electric-leakage switches can work normally, turn on the water supply switch and the power switch. After about 3 minutes of self-inspection, the product can be operated through the control handle or remote control.
Model: IT-200-C
Shell material: ABS
Color: White
Toilet cover: PE
Control method: manual button + remote control button
Power supply voltage: input voltage AC100-240V 50/60Hz output 24V
Power consumption: static ≤1.5W dynamic ≤15W dynamic heating power consumption ≤60W
1. Remote control\button control for changing sleeves
2. Thermostatic seat ring
3. Delayed response
4. Slow down cover
5. Motor overload protection
6. Multiple waterproof and moisture-proof
Installation Notes:
1. Insert the 2 expansion rubber sleeves with nuts into the 2 mounting holes on the ceramic toilet, then place the fixing plate and the metal adjustment piece in turn, and tighten the 2 fixing screws by hand (about 70% tight) to the expansion rubber. in the set of nuts.
2. Push the cover onto the fixing plate, move and adjust the position of the cover on the ceramic toilet. Then press the push rod of the cover, remove the smart cover, tighten the fixing screw with a screwdriver, and then push it into the fixing plate to complete the positioning of the host.
3. First connect the water inlet hose to the smart cover, then connect the filter to the other end of the hose, and finally connect the filter to the water supply connector. Be careful not to tighten too much when connecting the water pipe, so as not to damage the plastic threads, as long as you can ensure that there is no water leakage.
4. Turn on the water tap slowly and check for leaks. Turn off the water faucet after making sure no water leaks.
5. Insert the power plug, press the switch on the plug, the indicator light on it lights up to indicate that the power is on.
6. Leakage protection test: in the power-on state, press the test switch on the plug, then the indicator light goes out and the power is cut off. If the indicator light does not go out after pressing the test switch, or if the test switch is not pressed after the power is turned on, the indicator light also goes out automatically, indicating that there is a problem with the circuit or the power plug, and you should ask a professional to repair it before continuing the installation.
7. System self-inspection: After ensuring that the water-leakage and electric-leakage switches can work normally, turn on the water supply switch and the power switch. After about 3 minutes of self-inspection, the product can be operated through the control handle or remote control.
