You are here: Home » Products » Smart Toilet Seat Cover » Heated Toilet Seat Cover » Smart Toilet Seat Cover IT4002A

Smart Toilet Seat Cover IT4002A

Share to:
Availability:


Smart Toilet Seat Cover IT4002A Product Description:

Parameter of heated smart toilet seat:

Model: IT-4002-A

Shell material: ABS

Color: white (other colors can be customized)

Toilet cover: PE

Control method: manual button

Power supply voltage: input voltage AC100-240V 50/60Hz output 24V

Power consumption: static ≤1.5W dynamic ≤15W

Installation method: The installation board is separated from the host, and the installation is adaptive. 


Function of hygiene toilet seat for hotel:

1. Button control for changing sleeves

2. Humanized thermostatic seat ring

3. Slow down cover

4. The overall flip-up hatch

5. Delayed response

6. Motor overload protection

7. Multiple waterproof and moisture-proof

8. The maximum capacity of the cabin is 120 times

9. Double seat ring


How to remove the toilet cover?


1. The toilet cover of the toilet is broken. The toilet cover is fixed by two bolts, one on the left and one on the right.

The red circle location, below is the screw, both of which I encountered are plastic bolts and nuts.


2. Press the bolt with one hand on the top, and loosen the nut with the other hand below, which can be removed. Matters needing attention: It should be loosened counterclockwise, and tightened clockwise, but it doesn't matter.


3. After cleaning up the bad toilet cover, you need to measure the size, mark A (hole distance): the distance between the two holes; B

(Length): measure from the center of the hole to the outermost edge of the toilet, C (width): measure the widest part to the edge. have this

Three data, you can buy a brand new toilet seat. Be sure to take a picture and ask the owner and tell him

The three dimensions are for the size to be appropriate. The purpose of taking pictures for the owner is to judge whether the toilet is O-shaped, U-shaped, or V-shaped. These three types are really not so easy to distinguish. Generally speaking, there are more V-shaped toilets.


4. Check the accessories of the newly purchased toilet cover, first fix the bolts, screws and clips to the brackets.

The red circle part is slidable, and is finally used to fix the toilet lid. The left and right two buckles can slide to ensure that the bolt holes can be inserted.


5. Insert the screw holes, or fix it directly with a screwdriver. Note: You need to use a screwdriver to tighten the screws.

bolt to ensure that the bracket does not slide. I did not fasten it tightly at first, which caused the toilet seat to shake after it was installed.

To be reworked.


6. Align the new toilet cover with the bracket gap, and push it towards the water tank according to the direction indicated by the red arrow above.

The toilet lid is stuck into the bracket, and then the position indicated in the figure is the buckle mentioned in the fourth step, and you can

Secure the toilet lid.


Previous: 
Next: