The slow down function of toilet seat

In the daily use of the toilet, we will find such a phenomenon, that is, after the toilet is used, the toilet seat cover is generally slow down.

Soft close toilet seat is very convenient in life,so ordinary toilet seat can become slow down?  

1. Under normal circumstances, it is the position where the bottom of the toilet seat is connected to the toilet seat. The back of the toilet seat is screwed together. As long as you reach down and find the screws on both sides, you can remove the whole lid.  

2. Another: replace the toilet seat only need to remove the fixed bolt behind the toilet can be replaced;  When installing, operate in the opposite direction.  Most toilet seats are of any size, so just adjust two bolts when installing them.  But also need to measure the size, screw hole distance, the width and length of the toilet seat, and then buy a new toilet seat for replacement.  

Slow down is mainly to reduce noise, and prolong the service life.

Toilet replacement cover buffer shaft details  

For the slow drop of the toilet seat many people are not very understanding, then we will analyze the replacement of the cushion shaft of the toilet seat in detail.  

To replace the cushion shaft of the toilet seat, we need to remove the toilet seat first. Here, we need to know what type of toilet we use and then remove it, so as not to damage the toilet seat.  

Then prepare an L-shaped six-angle wrench and push its short side into the bottom of the toilet seat from the outside to push the pin out. The pin is the cushion shaft of the toilet seat.  Insert the new cushion shaft into the toilet seat and install it.  

How to adjust the toilet seat slow down speed?  

Many people will want to adjust the slow down speed of the toilet seat according to their own habits, how to adjust the slow down speed of the toilet seat?  

1. If the toilet seat is fixed with screws, when it can not slow down, you need to use a wrench to remove the screws, and then replace the new screws.  If the screws are installed in the open place of the toilet seat, they can be removed directly. If the screws are installed in the dark place of the lid, usually near the water tank, open the lid and you can see.  

2. If the toilet seat can not be repaired slowly, it is necessary to replace the toilet seat, need to remove the screws fixing the lid, you can remove the lid.  However, it should be noted that the size of the new toilet seat should be the same as the original one, including the screw pitch, and the fixing bolts should be adjusted at any time during installation.  

3. If the toilet seat is fixed with a bolt, use a wrench to remove the bolt and see what the problems are. If the bolt is the problem, it needs to be replaced and tightened counterclockwise with a wrench.  Different types of toilets use different LIDS, but most of them are secured by screws, so simply remove the screws and remove the lid.  

4. The above methods are more general and simple, the general user can repair, but if it is not useful, it is recommended to find local professional staff door-to-door maintenance, to see what is the cause.  Remember that they can not be repaired at will, which will cause the toilet seat to be damaged again, of course, you can also find businesses to buy, to provide maintenance services.