How to adjust the toilet seat damper?

Some toilet seats will slowly drop by themselves when we cover them down, without sound; while some toilet seats will directly collide with the toilet when we cover them down, making a very loud sound. This is generally the toilet cover slow-down system. the problem. This happens when the toilet cover is used for a long time. If we don't want the toilet cover to drop suddenly, we can only replace the damper at this time.

Can the toilet cover not drop slowly to be repaired?

Can not be repaired only replaced. This situation is generally a problem of slow drop damping. These buffer parts are generated by strong friction between plastics, and the toilet seat will have this problem after a long time. After taking out the two pins that connect the toilet behind the toilet cover, you can replace a new pair of pins. This is the damper of the toilet cover. If you know a fitter, you can use a right-angled hexagonal wrench to lift the pin of the damper and replace it with a new pin according to the size. Some dampers may not be sold alone. In this case, you can only buy a new toilet seat with a damper.

What should we do if the toilet lid is very loud?

This situation is because the damping oil in the damper responsible for the slow-down of the toilet lid is gone, so the slow-down does not play to the left or right when it is put down, and the sound will be very loud when it is dropped quickly. We can buy that kind of tape, or stick a foam pad and stick it where the toilet lid and the toilet are in contact, and it can reduce the sound. You can also buy a toilet seat cushion, which can also reduce the sound of the toilet lid when you put it on.

What should we do if the toilet lid cannot be lowered slowly?

1. If the toilet lid is fastened with screws, you need to use a wrench to remove the screw and replace it with a new one when you can't slow it down slowly.

2. If the toilet cover is slowly lowered and still cannot be repaired, all toilet covers need to be replaced, and the screws that fix the toilet cover need to be unscrewed, and then the toilet cover can be removed. However, it should be noted that the new toilet cover should be the same size as the original toilet cover, including the screw hole spacing, and the fixing bolts should be adjusted at any time during installation.

How to install and replace?

1. First check the toilet seat.  Put the upright toilet seat down. If it can stay in any position and fall slowly and evenly, there is nothing wrong with the toilet seat.  If the lid or seat falls with a snap, there is a problem with the damping system.  

2. Press the inside of the pin that connects the toilet seat to the outside of the toilet seat and lift the lid up.  It's easy to take the lid off.  If you look at it from the outside, you can't see any place to remove it. This is where you have to explain how to remove the toilet seat.

3. The two pins that came down are the damping slow drop system of the toilet seat.  It generally consists of an internal and external cylinder and a viscous damping fluid sealed in the cylinder.  The failure is due to poor sealing and leakage of damping fluid, so it is difficult to maintain and can only be replaced.  After dismantling, measure the dimensions of each part and buy the same type of pin according to the structure.