Our advantages on toilet seat dampers

Our advantages of toilet damper

We are committed to solving various problems in toilet seat cover,such as the rate of descent is not uniform, make loud noise and so on. As a professional manufacturer of fully automated SoftClose damper devices, we have been in this market for 10 years, and accumulated rich experience in customer service. Our products now represent us in over 50 countries around the globe. Our research and development department, with its experienced engineers, creative designers and detail-oriented technicians, keeps surprising the industry with new designs and cutting-edge features.

Characteristics and advantages of our products

A. Temperature characteristics

The torque produced by the damper changes when it is affected by the ambient temperature. This is because the change of temperature will cause the viscosity of the damping oil to change, and the torque output will decrease with the increase of temperature; it will increase with the decrease of temperature. When the temperature returns to normal, the torque will also return to its original value.

B. Speed characteristics

The torque of the damper also changes when the rotation speed is different. In general, when the rotation speed increases, the torque also increases; when the rotation speed decreases, the torque also decreases. In addition, the torque at start-up is also different from the standard torque.

How to repair the soft close damper of toilet seat?

When you close the lid on a newly purchased toilet, the lid and seat will fall down slowly. However, when a toilet is used for a long time, the lid always falls down quickly and hits the seat seat hard. What accounts for the difference? The main culprit is the soft close damper of the toilet seat.

1. The Theory

Toilet seat slow damping principle is slow damping system, it is composed of an internal and external cylinder and sealed in the cylinder of damping oil, there is a rotating shaft in the middle, spiral shape, and a hole is large, a hole is small. When the toilet seat falls, it will drive the rotating shaft to rotate, and the damping oil will be pressed from the big hole to the small hole through the spiral. Because the hole is small, it will be discharged slowly, so as to achieve the slow down function of the toilet seat.

2. Maintenance method

The reason why the toilet seat is no longer slow down is that the sealing is not good and the damping oil leaks, which is difficult to maintain and can only be replaced. The specific operation is to remove the original toilet damper, the pin at both ends of the toilet seat and toilet seat connection is the damping slow drop system of the toilet seat, press the inside of the pin outwardly with a tool, lift up and remove the toilet seat. Measure and observe the size and style of the removed pins, and then purchase the same type of pins according to the sample. Next is to install the new damper, in accordance with the disassembly method in reverse order operation, the newly bought pin is installed on the toilet seat, and then the two holes on the pin are aligned with the column on the toilet seat, press the installation can be.