Under normal circumstances, it is the position where the bottom of the toilet seat is connected to the toilet seat. The back of the toilet seat is screwed together. As long as you reach down and find the screws on both sides, you can remove the whole lid.

Toilet toilet damper is a kind of unidirectional rotary damper which can rotate 360 degrees. The damping force produced by the sealing oil in the damper on its power. Normally, such dampers need to be fixed to a rotating shaft and rotated in one direction to make it rotate.

The damping components in the damping structure are basically in an elastic state, mainly to the main structure can provide a good enough stiffness or damping, so that the damping damping structure can effectively meet the requirements required in normal use.

Dampers were first applied in aerospace, military and other industries, and their main role is shock absorption efficiency. Later, they were slowly applied to construction, furniture and hardware industries.

This is generally the toilet cover slow-down system. the problem. This happens when the toilet cover is used for a long time. If we don't want the toilet cover to drop suddenly, we can only replace the damper​ at this time.

The torque produced by the damper changes when it is affected by the ambient temperature. This is because the change of temperature will cause the viscosity of the damping oil to change, and the torque output will decrease with the increase of temperature.

The damping technology of resistance structure is mainly used in some special parts of the structure: supports, joints or accessories, floor space, between adjacent buildings, shear walls, between nodes, main structure, etc.

General hinge, it can be used for cabinet doors, windows, doors, etc. Hinge, from the material can be divided into: iron, copper, stainless steel. Hinges are suitable for cabinets and wardrobe doors, 75mm are suitable for windows and screen doors, 100-150mm are suitable for wooden doors and aluminum alloy doors in gates.

Every time the toilet is flushed, it seems that the turbulent water flow will swept away the dirt and bacteria together, but some studies have pointed out that the number of bacteria on the inner wall of the toilet that has just been flushed is still as high as 100,000.

The damper of the toilet cover is the two pins at the connection between the toilet cover and the toilet. They are filled with viscous damping grease to buffer, seal and lubricate.